Starting at $293.99
The Minimizer Trailer Slick Plate is a practical solution that promotes a cleaner environment by eliminating the need for greasing the trailer coupler plate. It serves as a reliable alternative when the Minimizer 5th Wheel Slick Plate cannot be used. This self-lubricating, solid polymer plate reduces wear on 5th wheels and upper couplers, increasing steer tire life and making trailer handling easier for drivers. It also protects the upper coupler plate from the elements and prevents metal-to-metal wear. With various dimensions available, this plate fits most trailers and is designed for frequent hook and drop applications.
- Minimizer Trailer Slick Plate - Promotes A Cleaner Environment By Removing The Need For Greasing The Trailer Coupler Plate And Is A Good Alternative When You Cannot Use The Minimizer 5th Wheel Slick Plate - *WARNING* DO NOT Use A Minimizer 5th Wheel Slick Plate, Trailer Slick Plate, Slick Disk, Or A Mfg Low Lube 5th Wheel Topplate In Conjunction With One Another. Doing So Could Cause A Couplign Failure. DO NOT INSTALL The Trailer Slick Plate If It Extends Past The Front Edge Of The Trailer Or The Upper Bolster Plate.
- Part #
- Dimensions
- King Pin Setback 102340
- 36" x 26" x 1/4"
- 12" - 14" 102346
- 36" x 28" x 1/4"
- 15" - 17" 102344
- 36" x 30" x 1/4"
- 18" - 20" 102345
- 36" x 33" x 1/4"
- 21" - 24" 102347
- 36" x 37" x 1/4"
- 25" - 27" 102348
- 36" x 43" x 1/4"
- 28" - 30" 102341
- 36" x 45" x 1/4"
- 31" - 36" 102342
- 36" x 48" x 1/4"
- 37" - 52" 102343
- 36" x 30" x 1/4"
- Frameless Dump
- Reduces Wear On 5th Wheels & Upper Coupler
- Eliminates The Need To Grease
- Installs On Existing And New Trailers
- Increases Steer Tire Life
- Easier Trailer Handling For Drivers
- Helps Keep Your Upper Coupler Plate Protected From The Elements & Keeps The Metal To Metal Wear Off
- A Strong, Self-Lubricating, Solid Polymer Plate
- Designed For Frequent Hook And Drop Applications
- DO NOT GREASE THE FIFTH WHEEL; For Best Performance And Longevity It Is Recommended To Keep The Poly Cover Clean And Dry
- Make Sure The 5th Wheel Is Not Equipped With A Slick Plate. The Use Of Both Systems May Result In A Failed Jaw Engagement With The King Pin Resulting In A System Failure
- Remove Grease From The Contact Surface Of The 5th Wheel Prior To Hooking Up
- Always Be Sure 5th Wheels Are Deburred Before Pinning Up To Trailer Slick Plate
- Periodically Check Bolts/Nuts And Retighten If Necessary
- Apply An Anti-Rust Inhibitor To The 5th Wheel During Regular PM's Or Every 2 Months. This Is Only Recommended To Protect From Corrosion. This Will Not Affect The Self-Lubricating Properties Of Minimizer Trailer Slick Plate
- Hardware Included With All Kits
- Available In Custom Sizes Pre-Drilled
Description
- Fits Most Trailers, Check Table Above For Dimensions & King Pin Setback
Fitment
Cancer and Reproductive Harm - www.P65Warnings.ca.gov.
Write Your Own Review
Buy together with
You may also like