The buffing wheel rake is an essential tool for cleaning up the edge of a buffing wheel while it's in use on a lathe or angle grinder. With a long-lasting design, you can easily replace just the metal filler if needed, saving you from having to replace the entire handle. To ensure safety, hold the rake securely when using it with a stationary bench grinder or lathe, exercising caution when raking on a grinder. By using your feel to hold the rake to the ground and the angle-grinder to the rake, you can effectively remove compound and soften edges. This helps prevent compound build-up, which can reduce the efficacy of the buffing wheel. Notice a significant decrease in residual aluminum dust build-up by using this rake, which fits most makes and models.

Buffing Wheel Rake For Metal Polishing

A Buffing Wheel Rake Is Used To Clean Up The Edge Of A Buffing Wheel While It's Running On A Lathe Or An Angle Grinder
Rakes Last A Very Long Time And You Can Replace Just The Metal Filler If Required Instead Of The Whole Handle
The Buffing Wheel Should Be Spinning At It's Normal Speed And The Rake Should Be Held Securely When Held Up To A Stationary Bench Grinder Or Lathe
On A Grinder, Please Exercise Caution When Raking
We Recommend Using Your Feel To Hold The Rake To The Ground And Holding The Angle-Grinder To The Rake To Remove Compound And Soften The Edges
When Too Much Compound Is Applied To The Buffing Wheel It Can Harden And Burn Onto The Edge OF The Buff
This Reduces The Efficacy Of The Buffing Wheel And The Rake Is Used To Remove this Compound Build Up
If You Notice A Significant Decrease In The Residual Aluminum Dust Build Up Around The Metal Surface While Building Rake The Buff And Apply A Small Amount Of Compound