300 Service Stainless Steel Cylinder Shafts Provide Excellent Corrosion Resistance And Extended Cycle Life -Cylinders Tested To Over 500000 Cycles. Lightweight, Corrosion Resistant Aluminum Cylinder Tube With Die Cast Aluminum End Caps. Rear Clevis Cast As Integral Part Of The Rear Cover For Improved Durability And Mounting Integrity. Double Acting, Emralon-Coated Piston Cup Assures Smooth Long Lasting Operation Even In Cold Weather Conditions (To -40F). Front End Cap Assembly Includes Pressure Seal, Dirt Seal And Oil Impregnated Bronze Bushing. Cylinder Tube Imprinted With Part Number And Date Code For Quick Identification. All Cylinders Are Factory Pressure And Leak Tested Prior To Shipping. Front Cover Kit-Includes Front Cover With Bushing And Seals Installed And Two Cylinder Gaskets. Rear Cover Kit-Includes Rear Cover With Two Cylinder Gaskets. Piston Cup Kit-Includes Piston Cup, Lock Nut And Two Cylinder Gaskets. Shaft Kit-Includes Shaft, Lock Nut And Two Cylinder Gaskets.
General Info
Type
Cylinder Construction
Aluminum Cylinder Tubing With A 16 RMS Finish, Lock Ring Construction Secures End Caps To Tube
Front Cover
Solid Aluminum Wtih Oilight Bronze Bushing, Delrin Seal, And 1/4" NPT Port
Rear Cover
Solid Aluminum With Mounting Hole For 1/2" Clevis Pin And 1/4" NPT Port
Piston Cup
Solid Aluminum With Nitrile "O" Ring Rated AT -40 Degrees F to +185 Degrees F And UHMW Polyethylene Wear Band
Piston Rod
5/8" Diameter 303 Series Stainless Steel With 5/8" - 18 Thread
Temp Rating
-40 Degrees Fahrenheit To +185 Degrees Fahrenheit
Pressure Rating
10 Psi Minimum To 150 Psi Maximum
Standard Operating Pressure 100 Psi
ÂÂ
Part # Cylinder Type Stroke Retracted Length Extended Length Thrust At 100 psi Draw At 100 psi 100308 Push/Pull 8.68" 15.60" 24.28" 962 lb 930 lb 100310 Bullet Type 10" 16.92" 26.95" 962 lb 930 lb ÂÂ
- 300 Service Stainless Steel Cylinder Shafts Provide Excellent Corrosion Resistance And Extended Cycle Life -Cylinders Tested To Over 500000 Cycles
- Lightweight, Corrosion Resistant Aluminum Cylinder Tube With Die Cast Aluminum End Caps
- Rear Clevis Cast As Integral Part Of The Rear Cover For Improved Durability And Mounting Integrity
- Double Acting, Emralon-Coated Piston Cup Assures Smooth Long Lasting Operation Even In Cold Weather Conditions (To -40F)
- Front End Cap Assembly Includes Pressure Seal, Dirt Seal And Oil Impregnated Bronze Bushing
- Cylinder Tube Imprinted With Part Number And Date Code For Quick Identification
- All Cylinders Are Factory Pressure And Leak Tested Prior To Shipping
- Front Cover Kit-Includes Front Cover With Bushing And Seals Installed And Two Cylinder Gaskets
- Rear Cover Kit-Includes Rear Cover With Two Cylinder Gaskets
- Piston Cup Kit-Includes Piston Cup, Lock Nut And Two Cylinder Gaskets
- Shaft Kit-Includes Shaft, Lock Nut And Two Cylinder Gaskets
- Sold Each
Description
- Fits Most Makes and Models
Fitment
